Fusion Pro Laser Machines

Software/Firmware for Fusion Pro Laser Systems

Fusion Pro

Firmware & Driver Downloads

Schrijf in om per e-mail een melding te ontvangen wanneer er een nieuwe driver of nieuwe firmware beschikbaar is voor uw laser.

Nu inschrijven

Epilog Software Suite 2.2.9.0 (8/27/2021)

  • Alles wat u nodig hebt om uw Fusion Pro-systeem te gebruiken
  • Installeert Epilog Job Manager en het Epilog Laser-dashboard

Versie 2.2.9.0 Release Notes

  • Adding new engravers to the Job Manager is more intuitive
  • Bugfixes en verbeteringen

- For more information on the Job Manager, click here.
- Download Software Suite install and use instructions.
- For information on how to use the Construction Lines feature, click here

Let op: verwijder oudere versies van Epilog Job Manager en het Epilog-softwarepakket voor de installatie! (Ga naar Controlepaneel > Programma's en Onderdelen en verwijder de software.)

Download 64-bits versie (x64) Download 32-bits versie (x86)

Minimale vereisten:

  • Windows 7, Windows 8.1 of Windows 10
  • Besturingssysteem moet voor installatie over alle systeemupdates beschikken
  • Ondersteuning voor OpenGL 3.0 (of hoger) of OpenGL 2.0ES (of hoger)
  • 4 GB RAM of meer
  • 2 processorkernen of meer
  • Processor mag elke Intel i3/i5/i7, AMD Ryzen 3/5/7 of AMD A4/A6/A8/A10/A12/FX zijn
  • Geïntegreerd gigabit-ethernet vereist voor Fusion M2 vision-systeem. Voor de Fusion Pro/Edge is dat niet vereist, maar wel prettig om te hebben.

Aanbevolen specificaties:

  • 8 GB RAM of meer
  • 4 processorkernen of meer
  • Processor kan elke Intel i5/i7, AMD Ryzen 5/7 of AMD A6/A8/A10/A12/FX zijn

1.0.4.2 Firmware Downloads


1.0.4.2 (.SWU)
1.0.4.2 (.ZIP)

Firmware: 1.0.4.2 (9/9/2021)

Let op: After upgrading the Fusion Pro to 1.0.4.2, you cannot downgrade to a version below 1.0.4.0.

Firmware 1.0.4.2 downloaden Firmware 1.0.4.2 (.zip) downloaden


Lees de instructies voor installatie

NEW FEATURES/ENHANCEMENTS

  1. Table can now be nudged when the machine is running. (New as of 1.0.3.6)
  2. Improved engraving quality of the Rotary Attachment. (New as of 1.0.3.6)
  3. Enabled the following features on the Fusion Pro 24/36: (New as of 1.0.3.6)
    • WiFi Capabilities
    • Job thumbnails at machine (requires newest Software Suite)
    • Edit job settings at the machine
    • Adjusted the Rotary Attachment’s park position for easier loading and unloading
  4. Enabled the following features on the Fusion Pro 24/36: (New as of 1.0.4.1)
    • Stack (Processing) Light
    • Ability to control the Air Assist from the Software Suite
    • Carriage camera for registration
  5. Improved vector speed and power compensation. (New as of 1.0.3.6)
  6. Power and Frequency can be modified while the job is running, dependent on job and laser type. (New as of 1.0.4.1)
  7. Added dynamic raster ramps for improved raster speeds and the ability to disable this feature in the settings menu. (New as of 1.0.4.1)

BUG FIXES:

Miscellaneous bug fixes and enhancements

FIRMWARE FAQ'S:

  • How do I know what firmware version I have?
    • If you have older firmware, you can determine your firmware version under Settings (gear icon) > Version on the control panel. If your firmware version is newer, it will be listed at the bottom of the settings menu.
  • How often will I receive firmware updates?
    • If you have signed up for firmware updates, we only send new versions to customers when there are feature updates or large bug fixes. Incremental changes are only released to new production machines, and don't need to be updated in your machine if you are not experiencing issues.
Portions of this page translated by Google.